The GPS M-Generation Shear Balers are high-volume scrap processing machines designed for Australian metal recyclers, scrap yards and wrecking yards handling everything from light scrap through to complete car bodies. Available Australia-wide through Onetrak, the M-Generation is designed to be used as a shear baler, scrap metal baler and car baler to process scrap metal, car bodies, rebar, appliances, large metal pipes, scrap iron and general metal waste. If you’re looking to increase your scrap metal recycling equipment’s processing speed, the M-Generation shear baleris built to deliver high productivity with short processing times and a lower cost per tonne.

Available in six models, the GPS M-Generation shear baler combines a large loading box with powerful compression and shearing forces to efficiently process large quantities of scrap. The shear force ranges from 550 to 1,050 tonnes, while lid forces go up to 275 tonnes, depending on the shear baler model and configuration. The lids are powered by either three or four cylinders to distribute the compression force evenly across the material, while the fast-closing system helps reduce cycle times. Box lengths range from 5,000 to 7,500mm, providing the capacity to handle bulky metal waste and vehicle bodies efficiently.

The M-Generation scrap yard equipment is available with a diesel or electric motor and comes in both stationary and semi-mobile configurations. It is suitable for a wide range of metal recycling operations including car wreckers. Depending on the model, material and operating conditions, this range of shear baler machinery can process up to 26 tonnes per hour through the shear, and up to 20 tonnes per hour of baled metal material.

Built for demanding recycling, the M-Generation scrap metal baler uses premium components including Hardox 450 wear-resistant steel, Bosch-Rexroth hydraulics and Siemens electrical systems. The robust baler design is complemented by minimal maintenance requirements, remote technical assistance, spare parts support and Onetrak on-site servicing. Optional shear baler features can be added on request, including radio remote control, a loader arm with operator station, package ejection port and lifting jacks. This allows you to configure the shear baler machine around your operating preferences.

The GPS M-Generation range includes different case lengths and power configurations. Onetrak is always available to help recommend the best set up to boost your overall productivity. So, if you’re an Australian business looking for ascrap car baler, recycling baler, semi-mobile scrap metal baler, or are after an efficient shear baler for sale, theGPS M-Generation Shear Baler provides a powerful combination of productivity, flexibility and durability. Contact Onetrak Australia to discuss the right GPS Shear Baler model for your operation.

‍

Safety Compliance:

GPS Recycling have been produced to meet rigid European (CE) regulations for Health, Safety & Environmental Protection Standards.

Key Features:

• Most powerful shear baler in its category
• Maximum production efficiency
• Hybrid shear baler
• Flexible and robust design
• Large box for excellent performance
• Fast closing lid system
• Superior strength pusher cylinder
• Lids with 3 or 4 cylinders to distribute power evenly
• Suits scrap and ELV processing
• Stationary and Semi-Mobile versions available
• Package capacity of 23-30 per hour
• Car Bodies 20-25 per hour
• Light scrap capacity of 12-15 per hour
• Minimal maintenance (remote assistance, spare parts in stock, digital platform)
• Designed for lower consumption
• Flexible customisation options
• Top components (Hardox 450 sheet metal, Bosch-Rexroth hydraulics, Siemens electrics)
• High productivity at low processing time
• 6 models available with different case lengths

‍

Materials:

• Scrap Metal
• Car Bodies
• Light Scrap
• Rebar
• Shredded Metal
• Appliances
• Non-Ferrous
• Pipe
• Scrap Iron
• Metal Waste

Industries:

• Metal recycling
• Scrap yards
• Wrecking yards

‍

Options:

• Diesel or electric motor
• Radio remote control
• Loader arm with operator station
• Package ejection port
• Lifting jacks

‍