The GPS Destroyer Winged Shear Balers deliver high-capacity scrap processing technology to the Australian metal recycling industry. Available nationally through Onetrak, Destroyer Shear Balers are designed for scrap yards, metal recyclers, and wrecking yards that need to process large volumes of heavy, bulky material quickly and efficiently. Combining powerful shearing, baling and logging capability in one stationary shear bale logger, the Destroyer can process foundry scrap, pipe, beams, plate, heavy metal steel (#1 & #2), light scrap, clips, busheling, automobiles and appliances. For operators comparing shear balers, car crushers, or recycling balers, the Destroyer Shear Baler from GPS provides a versatile, heavy-duty solution for reducing scrap into manageable, high-density material.

Built around the latest-generation hydraulic technology, the GPS Destroyer shear baler is engineered for high productivity with reduced processing time, fuel consumption, and cost per tonne. Five model sizes are available, with shear forces ranging from 800 to 1,200 tonnes and a choice of diesel or electric power. Intelligent short-stroke shear cycles allow the shear baler machine to adjust its operation to the material being processed, thereby increasing throughput and minimising unnecessary cycle time. Depending on the bale shear model and material, shearing production can reach approximately 18–45 tonnes per hour, while bale and log production ranges from 15–40 tonnes per hour.

A major advantage of the Destroyer metal baler is its exceptionally large loading area. The loading compartment is more than 2.8 metres wide with a fully opening side, allowing excavators and material handlers to load large, awkward and bulky scrap efficiently. Its three-lid closing system delivers an extremely high combined compression force to fold and compact material before shearing. This makes the Destroyer the best bale shear for heavy ferrous scrap, vehicle bodies, and oversized material that can be difficult to process with a conventional metal baler, recycling baler, or car crusher. Depending on the model of scrap metal baler you choose, final bale and logging sizes are available in 800 x 600mm or 1,000 x 650mm.

Durability and reliability are central to the design of the Destroyer shear bale logger. Only premium components are used, including Hardox 450 wear-resistant steel, Bosch-Rexroth hydraulics, and Siemens electrical systems, allowing this scrap recycling machine to operate as metal recycling equipment in some of the toughest work environments in the world. This stationary shear baler machine is also designed to minimise maintenance requirements, with remote technical assistance, readily available spare parts, and reliable on-site servicing from Onetrak’s team.

The GPS Destroyer range includes five models, with case lengths of 6, 7 or 9 metres along with diesel or electric drive options. Whether your operation is looking for a heavy-duty scrap metal baler, shear baler logger, car baler, high-production recycling baler, or superior scrapyard equipment for sale, the Destroyer metal recycling machinery range provides the power, capacity and efficiency required for the modern waste and recycling sector. The GPS  Destroyer Winged Shear Balers are now available through Onetrak Australia. If you need any help selecting the right model and configuration for your scrap-processing operation, just reach out to our team on 1300 727 520.

‍

Safety Compliance:

GPS Recycling have been produced to meet rigid European (CE) regulations for Health, Safety & Environmental Protection Standards.

‍

Key Features:

• Latest generation hydraulic power for efficiency and reduced cost per tonne
• Available in 5 model sizes
• Diesel or electric options
• Most powerful winged shear baler
• Over 2.8 metre loading compartment (with full side opening)
• Suits large, bulky scrap material
• Stationery version only
• Intelligent short-stroke shear cycles
• Three lid closing system with combined force of 600 tonnes
• Package capacity of 15-40 per hour
• Light scrap capacity of 25-45 per hour
• Minimal maintenance (remote assistance, spare parts in stock, digital platform)
• Designed for lower consumption
• Flexible customisation options
• Top components (Hardox 450 sheet metal, Bosch-Rexroth hydraulics, Siemens electrics)
• High productivity at low processing time

‍

Materials:

• Foundry Scrap
• Pipe
• Beams
• Plate
• Heavy Metal Steel (HMS #1 & HMS #2)
• Light Scrap
• Clips
• Busheling
• Automobiles
• Appliances

‍

Industries:

• Metal recycling
• Scrap yards
• Wrecking yards

‍

Options:

• Diesel or electric motor
• Three case lengths (6, 7, or 9 metres)
• Radio remote control
• Loader arm with operator station
• Package ejection port
• Lifting Jacks