The GPS 80-2C-XL is a continuous feed automatic baler that offers high-production of light scrap and metals for the waste and recycling sector. If your company needs consistent processing of light scrap, aluminium, iron or copper, this scrap metal baler is the perfect addition to your site. Built as a stationary automatic baling machine, the 80-2C-XL combines continuous feeding, variable precompression settings and a powerful final compression to produce dense, uniform packages that are easier to handle, store and transport.
Electric Motor: 1x45kW | 1x90kW | 1x110kW
Final Compression: 140 tonnes
Charging Box: 1,600 x 1,300 x 400mm
Bale Size: 400mm x 300mm x V
Cycle Time: 60 sec | 45 sec | 30 sec
Bale Production: Up to 120 bales/hour
Versions: Stationary Only
About the
GPS 80-2C-XL Continuous Feed Automatic Balers
The GPS 80-2C-XL is a continuous feed automatic baler that offers high-production of light scrap and metals for the waste and recycling sector. If your company needs consistent processing of light scrap, aluminium, iron or copper, this scrap metal baler is the perfect addition to your worksite. Built as a stationary automatic baling machine, the 80-2C-XL combines continuous feeding, variable precompression settings and a powerful final compression to produce dense, uniform packages that are easier to handle, store and transport. Its large loading box and hopper make it well suited to busy scrap yards and metal recycling operations processing high volumes of loose metal.
The 80-2C-XL metal baler delivers up to 140 tonnes of final compression force, producing compact bales measuring approximately 400mm x 300mm with variable length. Depending on the selected power configuration, production can reach up to 120 bales per hour, with cycle times as short as 30 seconds. This high-output recycling baler can process a range of popular metals, including copper, iron and aluminium.
Designed for continuous operation, the GPS 80-2C-XL baling machine incorporates variable pre-compression, a cover with cutting blade and a large 1,600 x 1,300 x 400mm charging box to help maintain consistent feed and bale density. Bolted and replaceable wear plates, together with corrugated or wear-resistant internal surfaces, are designed to withstand abrasive scrap while simplifying maintenance over the life of the machine. A modular power unit also allows the scrap metal baler to be configured around different production requirements.
Three models are available, with electric power configurations ranging from 45kW through to 110kW combined output, allowing operators to match production capacity with their expected workload. Premium components including Hardox 450 wear-resistant steel, Bosch-Rexroth hydraulics and Siemens electrical systems support durability and reliability in demanding recycling worksites. GPS has also designed this baler machine for reduced consumption and straightforward maintenance, supported by remote assistance, spare parts availability and Onetrak’s Australian service support.
For Australian businesses looking for an automatic recycling baler, high-production baling machine or scrap metal baler for sale the GPS 80-2C-XL provides an efficient stationary solution for processing aluminium, iron, copper and other light metal scrap. Its combination of continuous feeding, high compression force, rapid cycle times and dense bale production makes it a practical piece of metal recycling equipment for scrap yards and recycling facilities looking to increase throughput and improve the handling, storage and transport of baled metal.
Safety Compliance:
GPS Recycling Equipment has been produced to meet rigid European (CE) regulations for Health, Safety & Environmental Protection Standards.
Key Features:
- Produces high-density packages
- Large loading box with hopper
- Stationary design
- Bolted and replaceable wear plates
- Fretted or corrugated wear-resistant sheets
- Cutting cover
- Variable pre-compressions
- Modular power unit
- Max. package capacity of 120 per hour
- Max. aluminium capacity of up to 6 tonnes an hour
- Max. iron capacity of up to 10.8 tonnes an hour
- Max. copper capacity of up to 14.4 tonnes an hour
- Minimal maintenance (remote assistance, spare parts in stock, digital platform)
- Designed for lower consumption
- Flexible customisation options
- Top components (Hardox 450 sheet metal, Bosch-Rexroth hydraulics, Siemens electrics)
- 3 models available with different case lengths
Materials:
- Scrap Metal
- Light Scrap
- Iron
- Aluminium
- Copper
Industries:
- Metal recycling
- Scrap yards
- Wrecking yards
Options:
- Radio remote control
- Loader arm with operator station
Specifications
- Electric Motor: 1x45kW | 1x90kW | 1x110kW
- Final Compression: 140 tonnes
- Charging Box: 1,600 x 1,300 x 400mm
- Bale Size: 400mm x 300mm x V
- Cycle Time: 60 sec | 45 sec | 30 sec
- 1x45kW Capacity: 60 bales an hour, Aluminium 1.2-3.0 tonnes/hour, Iron 2.0-5.4 tonnes/hour, Copper 2.6-7.2 tonne/hour
- 1x90kW Capacity: 80 bales an hour, Aluminium 1.5-4.0 tonnes/hour, Iron 2.4-7.2 tonnes/hour, Copper 3.1-9.6 tonne/hour
- 2x55kW Capacity: 120 bales an hour, Aluminium 1.8-6.0 tonnes/hour, Iron 3.0-10.8 tonnes/hour, Copper 3.9-14.4 tonne/hour
- Versions: Stationary Only
- Models: 1x45kW, 1x90kW, 2x55kW